View source for ET0

{{DISPLAYTITLE:SNAKE OBD1 EMU}}
[[File:ET0_Device.jpg|left|thumb|500px|SNAKE OBD1 EMU]]
== Description ==
{{ET0_Description}}<br clear=all>

== Features ==
*'''RealTime Programming'''. Tuning in RealTime.
*'''RealTime Datalogging'''. Feedback of ECU sensors information.
*'''Bluetooth built in'''. Wireless Datalogging in mobile App.
*'''Onboard Datalog'''. Record up to 3 hours of Data.
*'''Analog Inputs'''. Extra sensors Datalogging.
*'''Dual Datalog'''. USB + Bluetooth datalog.
*'''Datalog Keeper'''. Keep Datalog alive while you turn ignition off.
*'''Easy Connect'''. No COM port settings or drivers required.
== ECU Hardware ==
SNAKE OBD1 EMU is compatible with the following ECU Families:
*[[M66207_Denshigiken|Denshigiken M66207 based ECUs]] (see [[M66207_Denshigiken_MOD_ET0|Installation Guide]])
*[[M66207_OKI|OKI M66207 based ECUs]] (see [[M66207_OKI_MOD_ET0|Installation Guide]])
{{Note|reminder|This ECUs can be installed in any Car with a B, D, F or H series of Engines Directly or using [[OBD2A-OBD1|OBD2A-OBD1]] or [[OBD2B-OBD1|OBD2B-OBD1]] Conversion Harness.}}

== Emulator Modes ==
'''DEMON''' (Default).<br/>
All extended features of DEMON board and unique features of SNAKE OBD1 EMU are here.
*'''Easy Connect'''. Choose "Snake OBD1 EMU" in HTS Emulator Settings. No COM port settings or drivers required (Win 10 and above with HTS 2.22+).
*'''Dual Datalog'''. While USB connected with HTS and Datalogging in progress your Android Bluetooth Dashboard stay functional (TunerView or similar)
*'''Datalog Keeper'''. Keep datalog alive while you turn ignition off. It's help back to datalogging when you turn ignition on 10-20 times faster.
*'''Analog inputs'''. 5 onboard analog inputs for datalogging and monitoring data.
*'''Onboard Datalog'''. Record hours of datalog on a track days and analyze later at home or send to your tuner.
*'''ELM327 Datalog'''. Convert OBD1 to ELM327 protocol. Use alot of free mobile app like Torque for wireless digital dash and datalog.
'''OSTRICH'''.<br/>
Legacy compatibility for any software with OSTRICH protocol.

== Bluetooth Modes==
'''ISR Datalog'''.<br/>
Datalogging with the TunerView mobile app.<br/>

'''ELM327 Datalog'''.<br/>
Convert OBD1 to ELM327 protocol. Compatible with many diagnostic apps and digital dashes.
*Supports Android and iOS.
*Read and clear DTC's with your mobile phone.
*Record and analyze data while racing.
*Digital Dashboard.
*Trip Computer.

'''Currently tested with:'''
*TunerView (iOS, Android).
*Torque (iOS, Android).
*CarScanner (iOS, Android).
*RealDash (iOS, Android).

== DTC Codes==
{| class="wikitable"
|-
! ELM 327 !! OBD1 !! Description
|-
|P0130 || 1 || O2A - Oxygen Sensor #1
|-
|P0105 || 3 || MAP - Manifold Absolute Pressure Sensor
|-
|P0320 || 4 || CKP - Crank Position Sensor
|-
|P0105 || 5 || MAP - Manifold Absolute Pressure Sensor
|-
|P0115 || 6 || ECT - Engine Coolant Sensor
|-
|P0120 || 7 || TPS - Throttle Position Sensor
|-
|P0340 || 8 || TDC - Top Dead Center Sensor
|-
|P1382 || 9 || CYP - Cylinder Position Sensor
|-
|P0110 || 10 || IAT - Intake Air Temperature Sensor
|-
|P2226 || 13 || BARO - Atmospheric Pressure Sensor
|-
|P0511 || 14 || IAC - Idle Air Control Valve
|-
|P0350 || 15 || ICM - Ignition Control Module
|-
|P0200 || 16 || Fuel Injectors
|-
|P0500 || 17 || VSS - Vehicle Speed Sensor
|-
|P1297 || 20 || ELD - Electrical Load Detector
|-
|P1258 || 21 || VTS - VTEC Solenoid
|-
|P1259 || 22 || VTP - VTEC Pressure Valve
|-
|P0324 || 23 || KS - Knock Sensor
|-
|P0135 || 41 || PO2H - Primary Oxygen Sensor Heater   
|}