MD0 - Revision history

SnakeTuning: /* Pigtail Connector */

2026-01-08T23:20:01Z

Pigtail Connector

← Older revision		Revision as of 23:20, 8 January 2026
Line 90:		Line 90:
	* '''Red''': Cylinder Position Output.		* '''Red''': Cylinder Position Output.
	* '''Yellow''': Crankshaft Position Output.		* '''Yellow''': Crankshaft Position Output.
			<br clear=all>

	==Set Output Mode==		==Set Output Mode==

SnakeTuning: /* Standalone ECU */

2026-01-08T23:18:58Z

Standalone ECU

← Older revision		Revision as of 23:18, 8 January 2026
Line 75:		Line 75:

	=Standalone ECU=		=Standalone ECU=
	{{Note\|warn\|To work with Standalone ECUs, Device Firmware must be updated to version 1.1 or later.}}		{{Note\|warn\|To work with Standalone ECUs, Device Firmware must be updated to version 1.1 or later. (see [[#Firmware Update\|Firmware Update]])}}

	==Connector Functions==		==Connector Functions==
Line 108:		Line 108:
	==Trigger Waveform==		==Trigger Waveform==
	[[File:MD0_Trigger_Waveform.jpg\|center\|Trigger Waveform]]		[[File:MD0_Trigger_Waveform.jpg\|center\|Trigger Waveform]]


	=Service Tool=		=Service Tool=

SnakeTuning at 23:16, 8 January 2026

2026-01-08T23:16:18Z

@@ Line 1: / Line 1: @@
 {{DISPLAYTITLE:SNAKE MINI DIZZY}}
 [[File:MD0_Device.jpg|left|thumb|500px|SNAKE MINI DIZZY]]
 =Description=
 {{MD0_Description}}<br clear=all>
@@ Line 11: / Line 12: @@
 *Compatible with OEM and Standalone ECUs.
-=Plug Types=
+=Initial Configuration=
-{{MD0_Plugs}}
+{{Note|warn|Before installation [[MD0|SNAKE MINI DIZZY]] must be configured to match your engine model.}}
-=Device Configuration=
+==Set Engine Model==
 [[File:MD0_Configure_01.png|center|Before installation [[MD0|SNAKE MINI DIZZY]] must be configured to match your engine model.]]
-=Installation=
+==Install Device==
 [[File:MD0_Install_01_Remove_OEM_Dizzy.jpg|thumb|right|STEP 1: Remove OEM Distributor ]]
 '''STEP 1: Remove OEM Distributor'''
@@ Line 29: / Line 25: @@
 *Remove the distributor mounting bolts
 *Remove distributor from cylinder head.
 [[File:MD0_Install_02_Remove_Parts.jpg|thumb|right|STEP 2: Remove following parts from the Distributor]]
@@ Line 37: / Line 32: @@
 *Pin
 *Pin retainer
 [[File:MD0_Install_03_Install_Coupling.jpg|thumb|right|STEP 3: Install Coupling to Device]]
@@ Line 45: / Line 39: @@
 *Drive in the pin
 *Secure it with the pin retainer
 [[File:MD0_Install_04_Install_Device.jpg|thumb|right|STEP 4: Install Device to cylinder head]]
@@ Line 57: / Line 50: @@
 <br clear=all>
-=Bluetooth Connection=
+=OEM ECU=
 {{Note|reminder|[[MD0|SNAKE MINI DIZZY]] has a built-in Bluetooth and a PC Service Tool.}}
 [[File:MD0_Bluetooth_01.jpg|thumb|right|Pairing a new Device]]
@@ Line 69: / Line 123: @@
 *When pairing is complete, you will see the device Name '''MD0-XXXXX''' and status <span style="color:green>Online</span>.
 <br clear=all>
 [[File:MD0_Bluetooth_02.jpg|thumb|right|Reconnect (After First Pairing)]]
@@ Line 78: / Line 131: @@
 {{Note|info|If you need to connect to another device, click '''Search'''. The Service Tool will remove the currently paired device and start searching for available devices.}}
 <br clear=all>

SnakeTuning at 20:15, 8 January 2026

2026-01-08T20:15:04Z

← Older revision		Revision as of 20:15, 8 January 2026
Line 1:		Line 1:
	{{DISPLAYTITLE:SNAKE MINI DIZZY}}		{{DISPLAYTITLE:SNAKE MINI DIZZY}}
	[[File:MD0_Device.jpg\|left\|thumb\|500px\|SNAKE MINI DIZZY]]		[[File:MD0_Device.jpg\|left\|thumb\|500px\|SNAKE MINI DIZZY]]
	== Description ==		=Description=
	{{MD0_Description}}<br clear=all>		{{MD0_Description}}<br clear=all>

	==Advantages==		=Advantages=
	*Improved ignition timing precision up to 0.1 deg at 14000 RPM.		*Improved ignition timing precision up to 0.1 deg at 14000 RPM.
	*Better spark energy without the inefficiencies of a traditional distributor system.		*Better spark energy without the inefficiencies of a traditional distributor system.
Line 11:		Line 11:
	*Compatible with OEM and Standalone ECUs.		*Compatible with OEM and Standalone ECUs.

	==Plug Types==		=Plug Types=
	{{MD0_Plugs}}		{{MD0_Plugs}}

	==ECU Modification==		=ECU Modification=
	{{Note\|warn\|OEM ECUs must be modified to [[MD0_TECH\|Accept Low Voltage Signals]]. See guides below.}}		{{Note\|warn\|OEM ECUs must be modified to [[MD0_TECH\|Accept Low Voltage Signals]]. See guides below.}}
	{{MD0_Guides}}		{{MD0_Guides}}

	==Device Configuration==		=Device Configuration=
	{{Note\|warn\|Before installation [[MD0\|SNAKE MINI DIZZY]] must be configured to match your engine model.}}		{{Note\|warn\|Before installation [[MD0\|SNAKE MINI DIZZY]] must be configured to match your engine model.}}
	[[File:MD0_Configure_01.png\|center\|Before installation [[MD0\|SNAKE MINI DIZZY]] must be configured to match your engine model.]]		[[File:MD0_Configure_01.png\|center\|Before installation [[MD0\|SNAKE MINI DIZZY]] must be configured to match your engine model.]]

	==Installation==		=Installation=
	[[File:MD0_Install_01_Remove_OEM_Dizzy.jpg\|thumb\|right\|STEP 1: Remove OEM Distributor ]]		[[File:MD0_Install_01_Remove_OEM_Dizzy.jpg\|thumb\|right\|STEP 1: Remove OEM Distributor ]]
	'''STEP 1: Remove OEM Distributor'''		'''STEP 1: Remove OEM Distributor'''
Line 57:		Line 57:
	<br clear=all>		<br clear=all>

	==Bluetooth Connection==		=Bluetooth Connection=
	{{Note\|reminder\|[[MD0\|SNAKE MINI DIZZY]] has a built-in Bluetooth and a PC Service Tool.}}		{{Note\|reminder\|[[MD0\|SNAKE MINI DIZZY]] has a built-in Bluetooth and a PC Service Tool.}}
	[[File:MD0_Bluetooth_01.jpg\|thumb\|right\|Pairing a new Device]]		[[File:MD0_Bluetooth_01.jpg\|thumb\|right\|Pairing a new Device]]

SnakeTuning: /* Bluetooth Connection */

2026-01-07T22:31:40Z

Bluetooth Connection

← Older revision		Revision as of 22:31, 7 January 2026
Line 60:		Line 60:
	{{Note\|reminder\|[[MD0\|SNAKE MINI DIZZY]] has a built-in Bluetooth and a PC Service Tool.}}		{{Note\|reminder\|[[MD0\|SNAKE MINI DIZZY]] has a built-in Bluetooth and a PC Service Tool.}}
	[[File:MD0_Bluetooth_01.jpg\|thumb\|right\|Pairing a new Device]]		[[File:MD0_Bluetooth_01.jpg\|thumb\|right\|Pairing a new Device]]
	'''Pairing a ~~new~~ Device'''<br/>		'''Pairing a New Device'''<br/>
	When ~~connecting~~ to the device for the first time, connection must be configured. Follow ~~this simple~~ steps:		When you connect to the device for the first time, the connection must be configured. Follow these steps:
	*Turn ON the Ignition.		*Turn ON the Ignition.
	*Make sure your PC~~'s Bluetooth is active~~.		*Make sure Bluetooth is enabled on your PC.
	*~~Start~~ '''~~Snake MD0~~ Tool'''		*Launch '''Service Tool'''
	*~~You~~ will see ~~Device~~ '''NONE''' and status <span style="color:maroon>Searching...</span>.		*In the Device field you will see Name '''NONE''' and status <span style="color:maroon>Searching...</span>.
	*Wait ~~about 10-20~~ seconds, Service Tool will automatically ~~found~~ the device and ~~setup~~ the connection.		*Wait 10–20 seconds — the Service Tool will automatically find the device and set up the connection.
	*~~Finally~~ you will see the ~~Serial Number of the connected~~ device '''MD0-XXXXX''' and status <span style="color:green>Online</span>.		*When pairing is complete, you will see the device Name '''MD0-XXXXX''' and status <span style="color:green>Online</span>.
	<br clear=all>		<br clear=all>


	[[File:MD0_Bluetooth_02.jpg\|thumb\|right\|~~Connect to the Paired Device~~]]		[[File:MD0_Bluetooth_02.jpg\|thumb\|right\|Reconnect (After First Pairing)]]
	'''~~Connect to the Paired Device~~'''<br/>		'''Reconnect (After First Pairing)'''<br/>
	After the first connection, Service Tool will automatically reconnect to the paired device.<br/>		After the first successful connection, the Service Tool will automatically reconnect to the paired device.<br/>
	*~~You~~ will see ~~Device~~ '''MD0-XXXXX''' and status <span style="color:maroon>Connecting...</span>.		*In the Device field you will see Name '''MD0-XXXXX''' and status <span style="color:maroon>Connecting...</span>.
	*After successful reconnect ~~you will see the Serial Number of~~ the ~~connected device '''MD0-XXXXX''' and~~ status <span style="color:green>Online</span>.		*After a successful reconnect, the status will change to <span style="color:green>Online</span>.
	{{Note\|info\|If you need to connect to another device, ~~just press the~~ '''Search''' ~~button~~. Service Tool will remove the paired device and start searching for available ~~ones~~.}}		{{Note\|info\|If you need to connect to another device, click '''Search'''. The Service Tool will remove the currently paired device and start searching for available devices.}}
	<br clear=all>		<br clear=all>

SnakeTuning: /* Bluetooth Connection */

2026-01-07T22:14:52Z

Bluetooth Connection

← Older revision		Revision as of 22:14, 7 January 2026
Line 65:		Line 65:
	*Make sure your PC's Bluetooth is active.		*Make sure your PC's Bluetooth is active.
	*Start '''Snake MD0 Tool'''		*Start '''Snake MD0 Tool'''
	*You will see ~~a message~~ '''Searching ~~Devices~~...~~'''~~.		*You will see Device '''NONE''' and status <span style="color:maroon>Searching...</span>.
	*Wait about 10 seconds, Service Tool will automatically found the device and setup the connection.		*Wait about 10-20 seconds, Service Tool will automatically found the device and setup the connection.
	*Finally you will see the Serial Number of the connected device '''~~SnakeMD0~~-~~SPP[xxx]~~'''		*Finally you will see the Serial Number of the connected device '''MD0-XXXXX''' and status <span style="color:green>Online</span>.
	<br clear=all>		<br clear=all>

Line 74:		Line 74:
	'''Connect to the Paired Device'''<br/>		'''Connect to the Paired Device'''<br/>
	After the first connection, Service Tool will automatically reconnect to the paired device.<br/>		After the first connection, Service Tool will automatically reconnect to the paired device.<br/>
	You'll see ~~a message~~ '''~~Waiting for Device No xxx~~'''.		*You will see Device '''MD0-XXXXX''' and status <span style="color:maroon>Connecting...</span>.
	{{Note\|info\|If you need to connect to another device, just press the button ~~with the Bluetooth icon~~. ~~The~~ Service Tool will remove the paired device and start searching for available ones.}}		*After successful reconnect you will see the Serial Number of the connected device '''MD0-XXXXX''' and status <span style="color:green>Online</span>.
			{{Note\|info\|If you need to connect to another device, just press the '''Search''' button. Service Tool will remove the paired device and start searching for available ones.}}
	<br clear=all>		<br clear=all>

SnakeTuning at 20:44, 15 October 2024

2024-10-15T20:44:45Z

← Older revision		Revision as of 20:44, 15 October 2024
Line 17:		Line 17:
	{{Note\|warn\|OEM ECUs must be modified to [[MD0_TECH\|Accept Low Voltage Signals]]. See guides below.}}		{{Note\|warn\|OEM ECUs must be modified to [[MD0_TECH\|Accept Low Voltage Signals]]. See guides below.}}
	{{MD0_Guides}}		{{MD0_Guides}}
	~~{{Note\|info\|Standalone ECUs do not required any modifications.}}~~

	==Device Configuration==		==Device Configuration==
	{{Note\|warn\|~~Updating. Back~~ to ~~the page later~~.}}		{{Note\|warn\|Before installation [[MD0\|SNAKE MINI DIZZY]] must be configured to match your engine model.}}
			[[File:MD0_Configure_01.png\|center\|Before installation [[MD0\|SNAKE MINI DIZZY]] must be configured to match your engine model.]]

	==Installation==		==Installation==
Line 33:		Line 33:
	[[File:MD0_Install_02_Remove_Parts.jpg\|thumb\|right\|STEP 2: Remove following parts from the Distributor]]		[[File:MD0_Install_02_Remove_Parts.jpg\|thumb\|right\|STEP 2: Remove following parts from the Distributor]]
	'''STEP 2: Remove following parts from the Distributor'''		'''STEP 2: Remove following parts from the Distributor'''
			*Thrust washer
	*Coupling		*Coupling
	*Pin		*Pin
Line 48:		Line 49:
	[[File:MD0_Install_04_Install_Device.jpg\|thumb\|right\|STEP 4: Install Device to cylinder head]]		[[File:MD0_Install_04_Install_Device.jpg\|thumb\|right\|STEP 4: Install Device to cylinder head]]
	'''STEP 4: Install Device to cylinder head'''		'''STEP 4: Install Device to cylinder head'''
	*Coat O-Ring with engine oil		*Coat O-Ring with engine oil.
	*Align offset of the lugs on the end of Device and its mating grooves in the Camshaft.		*Align offset of the lugs on the end of Device and its mating grooves in the Camshaft.
	*Slip Device into position		*Slip Device into position.
	*Install and tighten one mounting bolt ~~(any desired mounting point)~~		*Install and tighten one mounting bolt.
	*Install Coils and Wiring		*Install Coils and Wiring.
	*Connect Connector(s) to Device		*Connect Connector(s) to Device.
	<br clear=all>		<br clear=all>

SnakeTuning at 20:16, 15 October 2024

2024-10-15T20:16:13Z

@@ Line 18: / Line 18: @@
 {{MD0_Guides}}
 {{Note|info|Standalone ECUs do not required any modifications.}}
 ==Installation==
@@ Line 54: / Line 57: @@
 ==Bluetooth Connection==
-{{Note|reminder|For easy setup, [[MD0|SNAKE MINI DIZZY]] has a built-in Bluetooth and a PC Service Tool.}}
+{{Note|reminder|[[MD0|SNAKE MINI DIZZY]] has a built-in Bluetooth and a PC Service Tool.}}
 [[File:MD0_Bluetooth_01.jpg|thumb|right|Pairing a new Device]]
 '''Pairing a new Device'''<br/>
@@ Line 72: / Line 75: @@
 You'll see a message '''Waiting for Device No xxx'''.
 {{Note|info|If you need to connect to another device, just press the button with the Bluetooth icon. The Service Tool will remove the paired device and start searching for available ones.}}
 <br clear=all>

SnakeTuning: /* Installation */

2024-06-24T19:56:30Z

Installation

New page

{{DISPLAYTITLE:SNAKE MINI DIZZY}}
[[File:MD0_Device.jpg|left|thumb|500px|SNAKE MINI DIZZY]]
== Description ==
{{MD0_Description}} 

==Advantages==
*Improved ignition timing precision up to 0.1 deg at 14000 RPM.
*Better spark energy without the inefficiencies of a traditional distributor system.
*Easy Setup via Bluetooth Connection.
*Less cluttered engine compartment, making maintenance and modifications easier.
*Compatible with OEM and Standalone ECUs.

==Plug Types==
{{MD0_Plugs}}

==ECU Modification==
{{Note|warn|OEM ECUs must be modified to [[MD0_TECH|Accept Low Voltage Signals]]. See guides below.}}
{{MD0_Guides}}
{{Note|info|Standalone ECUs do not required any modifications.}}

==Installation==
[[File:MD0_Install_01_Remove_OEM_Dizzy.jpg|thumb|right|STEP 1: Remove OEM Distributor ]]
'''STEP 1: Remove OEM Distributor'''
*Disconnect Connector(s) from the distributor
*Disconnect the plug wires from the cap
*Remove the distributor mounting bolts
*Remove distributor from cylinder head.

[[File:MD0_Install_02_Remove_Parts.jpg|thumb|right|STEP 2: Remove following parts from the Distributor]]
'''STEP 2: Remove following parts from the Distributor'''
*Coupling
*Pin
*Pin retainer

[[File:MD0_Install_03_Install_Coupling.jpg|thumb|right|STEP 3: Install Coupling to Device]]
'''STEP 3: Install Coupling to Device'''
*Install Coupling to the shaft.
*Align the index mark of shaft and coupling.
*Drive in the pin
*Secure it with the pin retainer

[[File:MD0_Install_04_Install_Device.jpg|thumb|right|STEP 4: Install Device to cylinder head]]
'''STEP 4: Install Device to cylinder head'''
*Coat O-Ring with engine oil
*Align offset of the lugs on the end of Device and its mating grooves in the Camshaft.
*Slip Device into position
*Install and tighten one mounting bolt (any desired mounting point)
*Install Coils and Wiring
*Connect Connector(s) to Device
 

==Bluetooth Connection==
{{Note|reminder|For easy setup, [[MD0|SNAKE MINI DIZZY]] has a built-in Bluetooth and a PC Service Tool.}}
[[File:MD0_Bluetooth_01.jpg|thumb|right|Pairing a new Device]]
'''Pairing a new Device''' 
When connecting to the device for the first time, connection must be configured. Follow this simple steps:
*Turn ON the Ignition.
*Make sure your PC's Bluetooth is active.
*Start '''Snake MD0 Tool'''
*You will see a message '''Searching Devices...'''.
*Wait about 10 seconds, Service Tool will automatically found the device and setup the connection.
*Finally you will see the Serial Number of the connected device '''SnakeMD0-SPP[xxx]'''
 

[[File:MD0_Bluetooth_02.jpg|thumb|right|Connect to the Paired Device]]
'''Connect to the Paired Device''' 
After the first connection, Service Tool will automatically reconnect to the paired device. 
You'll see a message '''Waiting for Device No xxx'''.
{{Note|info|If you need to connect to another device, just press the button with the Bluetooth icon. The Service Tool will remove the paired device and start searching for available ones.}}
 

==Configuration==
{{Note|reminder|By default, for safety reasons, the device is shipped in transport mode with the ignition coils turned off.}}
[[File:MD0_Tool_Engine.jpg|thumb|right|Engine Parameters]]
'''Engine Parameters''' 
To activate the ignition coils, you must configure some engine parameters:
*Engine model.
*Mounting point on the cylinder head.
First, pick your engine model from the list. Then, use '''<''' and '''>''' buttons to select one of the three mounting points on the cylinder head, where you fix the [[MD0|SNAKE MINI DIZZY]]. 
Apply the settings by pressing the '''Set Base Angle''' button.
{{Note|info|If your engine is not on the list, you can use the learning procedure to set up the [[MD0|SNAKE MINI DIZZY]]}}
 

[[File:MD0_Tool_Timing.jpg|thumb|right|Ignition Timing]]
'''Ignition Timing''' 
After setting up the engine parameters, it's recommended to fine-tune the ignition using a timing light. 
*Start the engine and allow it to warm up
*Short the Service Check Connector with a jumper wire.
*Connect a timing light to the #1 Coil and point it toward the pointer on the timing belt cover.
*Adjust ignition timing, if necessary, using '''+1''', '''-1''' and '''+0.1''', '''-0.1''' buttons
{{Note|warn|Changes will be applied immediately with each press of the buttons}}
 

[[File:MD0_Tool_SparkMode.jpg|thumb|right|Spark Mode]]
'''Spark Mode''' 
Select your preferred Coils control mode: 

'''Sequential Mode''' (Default) 
This mode is standard in Honda OEM ECUs. 
Each coil fires once per cylinder, enhancing coil longevity and keeping them cooler.

'''Wasted Spark Mode''' 
This is what a lot of aftermarket sport ECUs use. 
Two coils work as a pair, cleaning fuel residue from cylinders during the exhaust cycle. Ideal for maintaining engine efficiency in boosted setups running rich.
{{Note|error|Using aftermarket or race coils in wasted spark mode without external fused power can damage your engine wiring.}}
 

[[File:MD0_Tool_Security.jpg|thumb|right|Security Options]]
'''Security Options''' 
Secure your device against unauthorized connections. Set up a PIN code for authentication.
 

[[File:MD0_Tool_Update.jpg|thumb|right|Update Firmware]]
'''Update Firmware''' 
Keep your firmware up to date.