ROVER-400

Rover 400 2nd generation

Description

The second generation Rover 400 Series, codenamed Theta or HH-R, was launched in 1995 as a hatchback and later as a saloon. It was based on the Honda Domani, which had been released in Japan in 1992, and was sold as part of the European Honda Civic range in five door hatchback form.

ECU Hardware

This car model is equipped with the following ECUs:

• 95-97 Models: OKI M66207 Based ECUs
• 97-99 Models: OKI M66507 Based ECUs

Chip Tuning

Programming and Datalogging with the SNAKE OBD1 EMU Device.

95-97 Models
SNAKE OBD1 EMU must be installed directly into OEM ECU equipped in a car (see Installation Guide).

97-99 Models
One of the following OBD1 ECU must be swapped in a car (no conversion harness required):

• Denshigiken M66207 based ECUs.
• OKI M66207 based ECUs.

Then you must install SNAKE OBD1 EMU in a swapped ECU (see Installation Guide).

Coil on Plug

COP Conversion with the SNAKE MINI DIZZY Device.
The world's smallest Device designed to completely remove the OEM Distributor and convert to an Individual Coils.

Check your Distributor plug type before order a kit at www.snaketuning.com

Depending of the year of production here are three different types of the Distributor plug(s).

• 

  OBD1 Type Plug

• 

  OBD2A Type Plug

• 

  OBD2B Type Plug