ET0

SNAKE OBD1 EMU

Description

Honda OBD1 ECU plug in module for RealTime Programming and Datalogging.
Most capable Moates DEMON replacement with bult in BlueTooth and bunch of unique features.

Features

• RealTime Programming. Tuning in RealTime.
• RealTime Datalogging. Feedback of ECU sensors information.
• Bluetooth built in. Wireless Datalogging in mobile App.
• Onboard Datalog. Record up to 3 hours of Data.
• Analog Inputs. Extra sensors Datalogging.
• Dual Datalog. USB + Bluetooth datalog.
• Datalog Keeper. Keep Datalog alive while you turn ignition off.
• Easy Connect. No COM port settings or drivers required.

ECU Hardware

SNAKE OBD1 EMU is compatible with the following ECU Families:

• Denshigiken M66207 based ECUs (see Installation Guide)
• OKI M66207 based ECUs (see Installation Guide)

This ECUs can be installed in any Car with a B, D, F or H series of Engines Directly or using OBD2A-OBD1 or OBD2B-OBD1 Conversion Harness.

Emulator Modes

DEMON (Default).
All extended features of DEMON board and unique features of SNAKE OBD1 EMU are here.

• Easy Connect. Choose "Snake OBD1 EMU" in HTS Emulator Settings. No COM port settings or drivers required (Win 10 and above with HTS 2.22+).
• Dual Datalog. While USB connected with HTS and Datalogging in progress your Android Bluetooth Dashboard stay functional (TunerView or similar)
• Datalog Keeper. Keep datalog alive while you turn ignition off. It's help back to datalogging when you turn ignition on 10-20 times faster.
• Analog inputs. 5 onboard analog inputs for datalogging and monitoring data.
• Onboard Datalog. Record hours of datalog on a track days and analyze later at home or send to your tuner.
• ELM327 Datalog. Convert OBD1 to ELM327 protocol. Use alot of free mobile app like Torque for wireless digital dash and datalog.

OSTRICH.
Legacy compatibility for any software with OSTRICH protocol.

Bluetooth Modes

ISR Datalog.
Datalogging with the TunerView mobile app.

ELM327 Datalog.
Convert OBD1 to ELM327 protocol. Compatible with many diagnostic apps and digital dashes.

• Supports Android and iOS.
• Read and clear DTC's with your mobile phone.
• Record and analyze data while racing.
• Digital Dashboard.
• Trip Computer.

Currently tested with:

• TunerView (iOS, Android).
• Torque (iOS, Android).
• CarScanner (iOS, Android).
• RealDash (iOS, Android).

DTC Codes

ELM 327	OBD1	Description
P0130	1	O2A - Oxygen Sensor #1
P0105	3	MAP - Manifold Absolute Pressure Sensor
P0320	4	CKP - Crank Position Sensor
P0105	5	MAP - Manifold Absolute Pressure Sensor
P0115	6	ECT - Engine Coolant Sensor
P0120	7	TPS - Throttle Position Sensor
P0340	8	TDC - Top Dead Center Sensor
P1382	9	CYP - Cylinder Position Sensor
P0110	10	IAT - Intake Air Temperature Sensor
P2226	13	BARO - Atmospheric Pressure Sensor
P0511	14	IAC - Idle Air Control Valve
P0350	15	ICM - Ignition Control Module
P0200	16	Fuel Injectors
P0500	17	VSS - Vehicle Speed Sensor
P1297	20	ELD - Electrical Load Detector
P1258	21	VTS - VTEC Solenoid
P1259	22	VTP - VTEC Pressure Valve
P0324	23	KS - Knock Sensor
P0135	41	PO2H - Primary Oxygen Sensor Heater