Honda Accord 5th generation (USA Spec)

Honda Accord 5th generation (USA Spec)

Description

The fifth generation USA Spec Accord was launched on 9 September 1993, for the 1994 model year and was based on the new 'CD' chassis. Larger than its predecessor, primarily to better suit the requirements of the North American market, the new model grew in width but shrunk in length, leaving it classified as a mid size car in North America.

ECU Hardware

This car model is equipped with the following ECUs:

• 93-95 Models: Denshigiken M66911 based ECUs
• 96-97 Models: Denshigiken M66509 based ECUs

Chip Tuning

Programming and Datalogging with the SNAKE OBD1 EMU Device.

93-95 Models
One of the following OBD1 ECU must be swapped in a car (no conversion harness required):

• Denshigiken M66207 based ECUs.
• OKI M66207 based ECUs.

Then you must install SNAKE OBD1 EMU in a swapped ECU (see Installation Guide).

96-97 Models
One of the following OBD1 ECU must be swapped in a car (OBD2A-OBD1 conversion harness required):

• Denshigiken M66207 based ECUs.
• OKI M66207 based ECUs.

Then you must install SNAKE OBD1 EMU in a swapped ECU (see Installation Guide).

Coil on Plug

COP Conversion with the SNAKE MINI DIZZY Device.
The world's smallest Device designed to completely remove the OEM Distributor and convert to an Individual Coils.

Check your Distributor plug type before order a kit at www.snaketuning.com

Depending of the year of production here are three different types of the Distributor plug(s).

• 

  OBD1 Type Plug

• 

  OBD2A Type Plug

• 

  OBD2B Type Plug