Honda Integra 3rd generation

From SNAKE WIKI
Revision as of 22:26, 16 June 2024 by SnakeTuning (talk | contribs) (→‎Chip Tuning)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Honda Integra 3rd generation

Description

Honda debuted the third generation model in 1993. It had a new four headlight front end design which was dubbed "spider eyes" by some enthusiasts. This generation Integra was generally not available in Europe, although some markets such as Greece did receive this model.

ECU Hardware

This car model is equipped with the following ECUs:

Chip Tuning

Programming and Datalogging with the SNAKE OBD1 EMU Device.

93-95 Models
SNAKE OBD1 EMU must be installed directly into OEM ECU equipped in a car (see Installation Guide).

96-99 Models
One of the following OBD1 ECU must be swapped in a car (OBD2A-OBD1 conversion harness required):

Then you must install SNAKE OBD1 EMU in a swapped ECU (see Installation Guide).

00-01 Models
One of the following OBD1 ECU must be swapped in a car (OBD2B-OBD1 conversion harness required):

Then you must install SNAKE OBD1 EMU in a swapped ECU (see Installation Guide).

Coil on Plug

COP Conversion with the SNAKE MINI DIZZY Device.
The world's smallest Device designed to completely remove the OEM Distributor and convert to an Individual Coils.

Check your Distributor plug type before order a kit at www.snaketuning.com
Depending of the year of production here are three different types of the Distributor plug(s).