Honda Prelude 4th generation

From SNAKE WIKI
Revision as of 22:27, 16 June 2024 by SnakeTuning (talk | contribs) (→‎Chip Tuning)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Honda Prelude 4th generation

Description

The fourth generation Prelude was introduced in Japan, and in Europe from early 1992. The car had a 58% front and 42% rear weight distribution. The four wheel steering system was changed to an electronic version

ECU Hardware

This car model is equipped with the following ECUs:

Chip Tuning

Programming and Datalogging with the SNAKE OBD1 EMU Device.

One of the following OBD1 ECU must be swapped in a car (no conversion harness required):

Then you must install SNAKE OBD1 EMU in a swapped ECU (see Installation Guide).

Coil on Plug

COP Conversion with the SNAKE MINI DIZZY Device.
The world's smallest Device designed to completely remove the OEM Distributor and convert to an Individual Coils.

Check your Distributor plug type before order a kit at www.snaketuning.com
Depending of the year of production here are three different types of the Distributor plug(s).