SNAKE MINI DIZZY
Description
The world's smallest device designed to completely remove the OEM distributor and convert to Individual Coils.
Despite the age of Honda's "Distributor Era" engines (B, D, F and H series), they are still very popular in the tuning community. A significant drawback of these older engines is the distributor ignition system, which includes a high-voltage section and “temperamental” VR sensors.
Our Device eliminates these shortcomings, enhancing engine performance and reliability.
Standalone ECUs currently in testing and will be unlocked in the next firmware update.
Advantages
- Improved ignition timing precision up to 0.1 deg at 14000 RPM.
- Better spark energy without the inefficiencies of a traditional distributor system.
- Easy Setup via Bluetooth Connection.
- Less cluttered engine compartment, making maintenance and modifications easier.
- Compatible with OEM and Standalone ECUs.
Plug Types
ECU Modification
Most Popular ECU Guides
- Chipped OBD1: Denshigiken M66207 ECU Guide
- Chipped OBD1: OKI M66207 ECU Guide
Search Guide by Car Model
90-93 Honda Accord 4.
- 90-93 Models: Denshigiken M66911 ECU Guide
93-97 Honda Accord 5. USA Spec.
- 93-95 Models: Denshigiken M66911 ECU Guide
- 96-97 Models: Denshigiken M66509 ECU Guide
93-97 Honda Accord 5. EUR Spec.
- 93-97 Models: Denshigiken M66911 ECU Guide
98-02 Honda Accord 6. USA Spec.
- 98-02 Models: Keihin M66589 ECU Guide
98-02 Honda Accord 6. EURO Spec.
- 98-02 Models: OKI M66589 ECU Guide (Regular O2)
- 98-02 Models: OKI SH7000 ECU Guide (Semi Wideband O2)
92-95 Honda Civic 5
- 92-95 Models: Denshigiken M66207 ECU Guide
94-01 Honda Civic 5.5. UK Spec.
- 94-97 Models: OKI M66207 ECU Guide
- 97-01 Models: OKI M66507 ECU Guide
96-00 Honda Civic 6.
- 96-98 Models: Denshigiken M66507 ECU Guide
- 99-00 Models: Keihin M66589 ECU Guide
95-01 Honda CR-V 1.
- 95 Models: Denshigiken D78334 ECU Guide
- 96-98 Models: Denshigiken M66507 ECU Guide
- 99-01 Models: Keihin M66589 ECU Guide
92-98 Honda CR-X DelSol.
- 92-95 Models: Denshigiken M66207 ECU Guide
- 96-98 Models: Denshigiken M66507 ECU Guide
92-97 Honda Domani.
- 92-97 Models: Denshigiken M66207 ECU Guide
89-93 Honda Integra 2.
- 89-91 Models: OBD0 ECUs not supported
- 92-93 Models: Denshigiken M66207 ECU Guide
93-01 Honda Integra 3.
- 93-95 Models: Denshigiken M66207 ECU Guide
- 96-99 Models: Denshigiken M66507 ECU Guide
- 00-01 Models: Keihin M66589 ECU Guide
92-96 Honda Prelude 4.
- 92-96 Models: Denshigiken M66911 ECU Guide
96-01 Honda Prelude 5.
- 96-01 Models: Denshigiken M66509 ECU Guide
95-99 Rover 400 Series. (D16 Engine)
- 95-97 Models: OKI M66207 ECU Guide
- 97-99 Models: OKI M66507 ECU Guide
99-05 Rover 45 Series (D16 Engine)
- 99-05 Models: OKI M66507 ECU Guide
Search Guide by ECU Hardware
OBD1 ECU Families
- Denshigiken M66207 ECU Guide
- OKI M66207 ECU Guide
- OKI M66507 ECU Guide
- Denshigiken M66911 ECU Guide
- Denshigiken D78334 ECU Guide
OBD2A ECU Families
- Denshigiken M66507 ECU Guide
- Denshigiken M66509 ECU Guide
OBD2B ECU Families
- Keihin M66589 ECU Guide
- OKI M66589 ECU Guide
- OKI SH7000 ECU Guide
Installation
STEP 1: Remove OEM Distributor
- Disconnect Connector(s) from the distributor
- Disconnect the plug wires from the cap
- Remove the distributor mounting bolts
- Remove distributor from cylinder head.
STEP 2: Remove following parts from the Distributor
- Coupling
- Pin
- Pin retainer
STEP 3: Install Coupling to Device
- Install Coupling to the shaft.
- Align the index mark of shaft and coupling.
- Drive in the pin
- Secure it with the pin retainer
STEP 4: Install Device to cylinder head
- Coat O-Ring with engine oil
- Align offset of the lugs on the end of Device and its mating grooves in the Camshaft.
- Slip Device into position
- Install and tighten one mounting bolt (any desired mounting point)
- Install Coils and Wiring
- Connect Connector(s) to Device
Bluetooth Connection
Pairing a new Device
When connecting to the device for the first time, connection must be configured. Follow this simple steps:
- Turn ON the Ignition.
- Make sure your PC's Bluetooth is active.
- Start Snake MD0 Tool
- You will see a message Searching Devices....
- Wait about 10 seconds, Service Tool will automatically found the device and setup the connection.
- Finally you will see the Serial Number of the connected device SnakeMD0-SPP[xxx]
Connect to the Paired Device
After the first connection, Service Tool will automatically reconnect to the paired device.
You'll see a message Waiting for Device No xxx.
Configuration
Engine Parameters
To activate the ignition coils, you must configure some engine parameters:
- Engine model.
- Mounting point on the cylinder head.
First, pick your engine model from the list. Then, use < and > buttons to select one of the three mounting points on the cylinder head, where you fix the SNAKE MINI DIZZY.
Apply the settings by pressing the Set Base Angle button.
Ignition Timing
After setting up the engine parameters, it's recommended to fine-tune the ignition using a timing light.
- Start the engine and allow it to warm up
- Short the Service Check Connector with a jumper wire.
- Connect a timing light to the #1 Coil and point it toward the pointer on the timing belt cover.
- Adjust ignition timing, if necessary, using +1, -1 and +0.1, -0.1 buttons
Spark Mode
Select your preferred Coils control mode:
Sequential Mode (Default)
This mode is standard in Honda OEM ECUs.
Each coil fires once per cylinder, enhancing coil longevity and keeping them cooler.
Wasted Spark Mode
This is what a lot of aftermarket sport ECUs use.
Two coils work as a pair, cleaning fuel residue from cylinders during the exhaust cycle. Ideal for maintaining engine efficiency in boosted setups running rich.
Security Options
Secure your device against unauthorized connections. Set up a PIN code for authentication.
Update Firmware
Keep your firmware up to date.